Samsung GT-S3850 Corby II Manual GPRS APN Settings

Globe, Smart and Sun may sometimes doesn't automatically push GPRS setting to your new Android smartphone after you insert the specific SIM card on it. With that case you need to manually create a new APN for your phone depending on what network or SIM you are using.
If you can't received the configuration from your network you may try configuring it manually by following the steps provided below.

Set your GPRS Settings on Samsung S3850 Corby II Manually 

First is we need to create Access Points:

Examples:

myGlobe Connect - Globe or see Globe GPRS and APN Settings

Smart Internet - Smart

Sun WAP GPRS - Sun or see Sun Cellular GPRS 3G MMS Settings

To create:

1. Go to SETTINGS > CONNECTIVITY > NETWORK > CONNECTIONS

 "A Pop-up message will appear just click YES" then Create

 P.S  check the Use Packet Data on SETTINGS > CONNECTIVITY

2. On Set Name: Type Any (Ex: myGlobe CONNECT for Globe, Sun WAP GPRS for SUN, etc.)

3. On Access Name: www.globe.com.ph 

4. On AUTH TYPE: none

5. Then Protocol: select HTTP

6. Home Url: type http://m.globe.com.ph 

8. Address: input 203.177.42.214:8080

9. Linger Time: (SEC.): 300

10. Click Save

Note: On the example steps above I set it to Globe, you may do the same with other networks by just filling up the correct info based on your provider.