The ZLT X21 is one of the most affordable yet high-performance 5G CPE routers available in the market today. Designed for both home and commercial use, it supports dual-mode 5G NS… Keep reading
The ZLT X21 is one of the most affordable yet high-performance 5G CPE routers available in the market today. Designed for both home and commercial use, it supports dual-mode 5G NSA and SA networks, making it a future-ready device that can adapts to new wireless technology infrastructures.
Equipped with advanced connectivity features, the ZLT X21 can deliver blazing-fast internet speeds right to your home. Whether you're using it for video streaming, online gaming, video calls, it ensures smooth and uninterrupted performance across all devices.
ZLT X21 Full Specs
General | |
---|---|
Name | Tozed Kangwei ZLT X21 |
Model | ZLT X21 |
Hardware | |
Chipset | Unisoc IVY510 |
Memory | 2GB RAM, 2GB ROM |
Interface |
|
Buttons |
|
Indicators |
|
Power supply |
|
Power consumption | ~24W |
Dimensions | 117 x 117 x 180 mm |
Weight | 513g |
Connectivity | |
Wi-Fi | 802.11 a/b/g/n/ax, dual-band (2.4GHz/5GHz) |
Network |
Bands
|
APN | Multi APN (3) |
MIMO |
|
Other features | |
VPN | PPTP/L2TP/SSL VPN/GRE/IP SEC |
VOIP | Yes, VoNR/VoLTE |
Firewall | Yes |
DHCP | Yes, DHCP Server |
DDNS | Yes |
Band Lock | Yes |
Cell Lock | Yes |
PCI Lock | Yes |
Work Mode | NAT / Router Mode |
Another impressive features of this device is that it supports up to 32 users connected simultaneously. This makes it ideal for larger households, apartments, or even small businesses that demand a stable and fast wireless connection for multiple users at the same time.
You can easily manage the router with its straight to the point and user-friendly web UI by entering the IP address in address bar using your browser. Just type 192.168.0.1 then use the default username and password below.
Username | Password |
---|---|
admin | admin |
Installation Instructions and Manuals
-
Take out the wireless data terminal and install the USIM card into the slot according to the direction marked on the data terminal.
When the
click
sound is heard, the USIM card is installed in place. - Use an RJ45 standard network cable to connect the LAN port and the computer of the data terminal.
- Connect the external power outlet and data terminal with the power adapter, press the switch and turn on the data terminal automatically. About 1–2 minutes later, the data terminal completes initialization.
- Place the data terminal in a flat place.
Interface | Uses | Remarks |
---|---|---|
POWER | Power switch | Press to turn on the power and then press to turn off the power |
Power jack | Power interface, connected to the particular power adapter | Be sure to use the particular power adapter, using another adapter may cause damage to the device or other hazards |
RESET | Reset key, long press 7 seconds to restore factory settings | Restore factory settings will clear all user settings parameters, please be careful |
LAN1 - LAN4 | Ethernet interface, used to connect computers and other devices | The LED flashes when connected |
SIM | USIM card interface, please insert the USIM card correctly in the identification direction | Do not unplug the USIM card when power on |
Troubleshooting and light indicators
Indicator | State | Description |
---|---|---|
Wi-Fi | OFF | Wi-Fi not open |
Wi-Fi | Blue | Wi-Fi open |
SIGNAL | OFF | No signal (signal values can also be viewed through the data terminal configuration page) |
SIGNAL | Red light flashing | SIM card not identified |
SIGNAL | Red | Poor signal quality |
SIGNAL | Yellow | Normal signal quality |
SIGNAL | Green | Good signal quality |
POWER | OFF | Foreign power exception, data terminal closed |
POWER | On | Normal external power, data terminal open |
4G | OFF | 4G unregistered network |
4G | Blue | 4G Registered Network |
5G | OFF | 5G unregistered network |
5G | Blue | 5G Registered Network |
Before accessing the internet, please check the following options:
- USIM card is valid and correctly inserted into the data terminal
- Power indicator light is on
- Signal indicator light is visible, preferably green
- 4G or 5G indicator lights are blue
WPS key: press the button for 1 to 3 seconds to release, the WIFI light flashes quickly, and the 5G WIFI WPS function is enabled. Press and hold for more than 6 seconds to release, the WIFI light flashes slowly, and the 2.4G WIFI WPS function is enabled. Devices that support WPS function (such as mobile phones) can automatically connect when entering WPS mode, and WPS function will be turned off automatically after 2 minutes of turning on.
If you're living in an area not covered by fiber lines, or if you're struggling with unreliable mobile signal indoors, the ZLT X21 can be a game-changer. With its six (6) powerful built-in 5G/LTE antennas, it can capture weak 4G/5G signals and convert them into a reliable home network giving you solid internet where smartphones may struggle.
Comments